Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in Yonkers?
Metal roof installation in Yonkers typically runs $14,000 to $34,000 for a full residential roof, with most homeowners landing between $18,000 and $26,000. That works out to roughly $9 to $16 per square foot installed, depending on the metal system, the pitch and complexity of your roof, and how much tear-off and decking work is needed underneath. A standing seam panel roof sits at the top of that range; an exposed-fastener steel roof sits closer to the bottom.
Those numbers cover the whole job: tear-off of the old roof, new underlayment, panels or shingles, trim, and cleanup. What they don’t cover is hidden rot or structural repairs, which we can only price once we’ve seen the deck. Ashton Roof Repair gives free written estimates in Yonkers, and the written estimate is what sets the final price. Call (833) 741-8977 to schedule one.
Key Takeaways
- Most Yonkers metal roofs fall between $18,000 and $26,000 all-in.
- Standing seam costs more than exposed-fastener panels but usually lasts longer with fewer fasteners to check.
- Roof pitch, dormers, and how many layers of old roofing need to come off are the biggest swing factors.
- Metal often costs two to three times a basic asphalt shingle replacement, so the decision comes down to how long you plan to stay.
- Older homes in Yonkers sometimes have decking that needs repair under the new roof, which adds cost.
Metal Roof Installation Cost Breakdown (2026)
Here’s how the money splits on a typical Yonkers metal roof. These are estimated ranges for 2026, and the written estimate you receive is the final word.
| Line item | Estimated cost | Notes |
|---|---|---|
| Standing seam metal (installed) | $16 to $22 per sq ft | Concealed fasteners, clean lines, longest service life |
| Exposed-fastener steel panels (installed) | $9 to $14 per sq ft | Value option, fasteners visible, good for simple roof shapes |
| Metal shingles or stamped panels (installed) | $11 to $17 per sq ft | Looks like shingle or slate, more labor-intensive |
| Tear-off of old roofing | $1,500 to $5,500 | Rises with number of layers and roof size |
| Sheathing and decking repair | $800 to $4,000 | Depends on how much soft or rotted wood is found |
| Underlayment and ice/water barrier | $1,200 to $3,000 | Higher on low-slope sections |
| Flashing, valleys, chimney and skylight detail | $700 to $3,500 | Every penetration and valley adds work |
| Ridge, trim, and fascia metal | $600 to $2,500 | More linear feet means more cost |
Two numbers sit at the top of the table for a reason: standing seam and exposed-fastener panels are the two choices most Yonkers homeowners actually weigh, and the gap between them is real money. On a mid-size roof, choosing exposed-fastener steel can save several thousand dollars over standing seam. What you give up is the concealed fastener system and the cleaner look. What you keep is the metal roof itself, which is the long-life part of the equation.
Where costs climb fast is in the details. A simple gable roof is the cheapest shape to cover. Add dormers, multiple valleys, a chimney, or a low-slope section and the labor grows. Tear-off matters too. Many older Yonkers homes carry more than one layer of old roofing, and every layer has to come off before new metal goes down. When we open the roof and find soft sheathing, that gets repaired before anything else happens, and we price it as a separate line so you can see exactly what you’re paying for.
What Affects Metal Roof Installation Pricing in Yonkers
- Roof size and pitch. A steep, tall roof takes longer and is slower to work, especially on the two- and three-story homes common in and around downtown Yonkers. Square footage is the biggest single variable, but pitch multiplies it.
- Roof complexity. Dormers, valleys, and chimney penetrations all need custom flashing, and custom flashing means hand work. A straightforward gable roof prices much lower than a cut-up roof over the same footprint.
- Tear-off and decking. Multiple layers of old shingles and any soft or rotted sheathing both add cost. On older Yonkers homes, we treat decking repair as likely rather than a surprise, because framing and sheathing from earlier decades often needs attention.
- Metal system choice. Standing seam, exposed-fastener panels, and metal shingles all have different installed costs, and the differences are meaningful. We install across GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral, so we can compare systems honestly instead of steering you toward whatever a single supplier stocks.
- Flashing and vents. Chimney flashing, skylights, plumbing vents, and ridge vent all need to be detailed correctly for a metal roof. Each penetration is a small job on its own.
- Weather protection details. Westchester County winters bring snow loads and freeze-thaw cycles. Getting the underlayment, ice and water barrier, and ventilation right is not optional here, and it shows up in the price. It’s also why a metal roof handles local winters well: metal sheds snow and ice rather than holding it.
How Does Metal Roof Installation Work in Yonkers?
A metal roof installation is a tear-off and rebuild, not a covering laid over the old roof. Here’s what a typical job involves, in order.
- Inspection and estimate. We look at the roof, the attic if accessible, the flashing, and the ventilation. You get a written estimate that breaks out labor, materials, and any decking repair we anticipate.
- Tear-off. Old roofing comes off down to the deck. We check the sheathing for soft spots and repair anything that needs it.
- Underlayment. New underlayment goes down, with ice and water barrier along eaves and in valleys where snow and meltwater concentrate.
- Panels or shingles. Metal goes on according to the manufacturer’s specification, with flashings, trim, and ridge cap installed as the roof goes up rather than tacked on at the end.
- Final inspection and cleanup. We walk the roof, check fasteners and seams, and clean up thoroughly. Metal scraps and fasteners get picked up, not left in the yard.
In Yonkers, winter weather shapes scheduling. Freeze-thaw cycles around Westchester mean we watch the forecast closely before booking an install, because underlayment and sealants need workable temperatures. If you’re planning ahead, the warmer months are easier for a full tear-off, though we can do installs across more of the year when conditions allow.
Metal Roof vs. Asphalt Shingles: Which Makes More Sense in Yonkers?
Metal costs more up front than asphalt shingles, often two to three times as much for the same roof. The question is whether you’ll be in the house long enough for the longer service life to pay back the difference.
Asphalt shingle roofs are the default across most of Yonkers, and they’re cheaper to replace. Metal lasts considerably longer, shrugs off snow and ice better, and doesn’t shed granules the way shingles do. If you’re planning to sell in the next few years, the math on metal rarely works. If you’re staying put, metal is the roof you install once.
We also install asphalt shingle systems from GAF, CertainTeed, Owens Corning, IKO, Atlas, and Tamko, plus Boral’s metal and composite products, so we can price both sides honestly and tell you which roof fits your house and your plans. A roof inspection is a good starting point if you’re unsure whether you need a full replacement or just a repair. Ashton Roof Repair offers standalone inspections with no repair purchase required.
Does a Metal Roof Add Value to a Yonkers Home?
A new roof, metal or otherwise, is one of the improvements buyers in Yonkers notice because it removes a major future cost from their list. Metal roofs are marketed partly on that longer lifespan. We’re careful not to promise a specific return, because the market sets the value, not the roofer. What we can say is that a documented roof replacement, with a written estimate and clear material details, is an easy thing to show a buyer, and a roof with an unknown age and visible wear is not.
How to Save on Metal Roof Installation
There’s no way around the fact that metal is a premium roof. But there are honest ways to bring the number down without cutting into the parts of the roof that protect your home.
- Get a real inspection first. Sometimes a repair makes more sense than a replacement right now, and a standalone inspection tells you that before you commit to anything. You can book one and decide later.
- Compare standing seam against exposed-fastener panels. If your roof is a simple shape, the value-tier panel option can save a lot for a modest difference in appearance.
- Bundle the decking repair into the original estimate. Catching soft sheathing up front is cheaper than discovering it mid-install, and it lets us plan labor honestly.
- Plan the timing. A full tear-off is easiest in workable weather, so planning around the season avoids rush scheduling.
- Take a free estimate. Our estimates are free and set the price in writing. Call (833) 741-8977 to get one.
What we don’t recommend is skipping underlayment, ice and water barrier, or proper flashing to save money. Those are the parts of a metal roof that keep water out of your house in Westchester’s snow and freeze-thaw seasons. Skipping them turns a long-life roof into a leak you’ll have to fix later.
Why Choose Ashton Roof Repair for a Metal Roof in Yonkers?
We work with seven leading manufacturers so the material fits your roof, not our inventory. That means we can price a standing seam, an exposed-fastener panel, and a metal shingle system side by side, and tell you honestly how each one fits your house. We also cover the full life of the roof: inspection, repair, and full replacement under one company, so if you start with a repair question and it turns into a replacement, you’re not starting over with a new contractor.
Ashton Roof Repair has been in business for 14 years. We started in 2012 and serve Yonkers as part of our Westchester work. When you call, you get a real diagnosis of your roof first. A recommendation comes second, and it’s based on what your roof needs rather than what we’d prefer to sell. If a repair will keep your current roof dry for years, we’ll say so. If it’s time to replace, we’ll show you the options and the numbers.
FAQs About Metal Roof Installation Cost
How much does metal roof installation cost in Yonkers per square foot?
Most Yonkers metal roofs run $9 to $16 per square foot installed, all-in. Standing seam sits at the top of that range and exposed-fastener steel at the bottom. The written estimate sets the final price, and our estimates are free. Call (833) 741-8977 for an exact quote.
Is a metal roof cheaper than asphalt shingles in Yonkers?
No. Metal typically costs two to three times as much as an asphalt shingle replacement for the same roof. It lasts considerably longer and handles snow and ice better, so whether it’s the better buy depends on how long you plan to stay in the house. Call (833) 741-8977 and we’ll price both honestly.
How long does metal roof installation take in Yonkers?
Most residential jobs take several days to a week or more depending on roof size, complexity, and tear-off. Weather can extend the schedule, especially around freeze-thaw cycles. We give a realistic timeline in the written estimate before work starts. Call (833) 741-8977 to get one.
Can I install a metal roof over my old shingles?
No, we don’t recommend it for metal in Yonkers. A metal roof over old shingles traps moisture, hides decking problems, and typically voids manufacturer requirements. Tear-off to the deck is the standard approach, and it lets us repair soft sheathing when we find it. Call (833) 741-8977 with questions.
Does a metal roof handle Yonkers winters?
Yes. Metal roofs shed snow and ice more readily than shingles, which matters in Westchester’s freeze-thaw climate. The catch is that the underlayment, ice and water barrier, and flashing have to be installed correctly, so the roof itself is only half the story. Call (833) 741-8977 to talk through your roof.
Can you come and look at my roof today?
Same-day service is often possible, and fast dispatch runs from 7am to 7pm. We answer 24/7. If you call outside dispatch hours, we’ll book you into the next opening, Sunday through Friday, 7am to 7pm. Call (833) 741-8977 and we’ll find a time that works.
Get a Free Metal Roof Estimate in Yonkers
If you’re weighing a metal roof for your Yonkers home, the first step is a real look at your roof and a written number you can plan around. Repairs when repair makes sense, replacement when it doesn’t, and a material recommendation built on your roof rather than a single supplier’s catalog. Call (833) 741-8977 for a free estimate. We answer 24/7, fast dispatch runs from 7am to 7pm, and we’re happy to walk you through the options before you decide anything.
Pricing reflects the Yonkers market as of 2026. Ashton Roof Repair offers free estimates – call (833) 741-8977.
Written by the team at Ashton Roof Repair, serving Yonkers since 2012.
What Our Customers Say
"Flashing where the roof meets the chimney had never been done right by the original builder. He rebuilt it properly with step flashing instead of just running a bead of caulk over it like the last two people did."
- Eric Hayes"Roof is solid and the price was competitive. The job ran a day over because of weather, which is nobody's fault, but I would have liked a call about it rather than noticing the crew hadn't shown up."
- Kelly Brooks"Went up in the attic first with a flashlight before going on the roof, which no other estimator bothered to do. Found the stain and worked backward from there."
- Gilbert Mendoza